Changing room unit

Its sizes, limited by its functionality in transport, can be:

1.50 x 1.50 x 2.45 m. (height) Individual changing rooms

3.00 x 2.45 x 2.45 m. (height)

4.00 x 2.45 x 2.45 m. (height)

5.00 x 2.45 x 2.45 m. (height)

5.50 x 2.45 x 2.45 m. (height)

Two or more units also can be attached to get more surface.

It allows to be handled easily with a low tonnage crane, what makes it easy to hibernate.

400 kg

1.500 kg

1.800 kg

2.000 kg

2.200 kg

Structure, can be sight, made of treated wood with risk class number 4, made of planks of 70 mm thick, or it can be covered with wersalite and AISI 316 stainless steel.

Outside walls, can be made of pressure-treated wood with class risk certification 4, with tongue and groove joint of 130 x 22 mm width, with an exterior finish with UV protect varnish, or made of wersalite, it is a material made of resins which is very resistant, this material supports solar rays without losing its color and is totally waterproof, does not become deformed being maintenance free. Due to the fact that it is a material with little porosity, the cleaning in case of graffiti is much simpler than in wood. Available in colors, imitationwood, cream and white.

Inside walls, can be made of wooden panels, in individual changing rooms, or in the collective ones can be made of trespa, this material is completely smooth, without pores, painted in white color with a permanent painting, what is ideal for public toilets, very hygienic, high density, very hard and strong and totally waterproof, what allows the use of abundant water and in pressure in periodical disinfection. The walls are 4 mm. thick and its weight is 8.4 kg/sq.m. It resists the impact value 4 of the EN 438-2 (11) index, water absorption 0%, thermal temperature -40º + 130º C. Reaction to fire according to UNE 23727/90 regulation. 

All its metallic components such us hinges, fixations and nuts and bolts are made of AISI 316 stainless steel, completely necessary in marine environments.

Floor made of wood in the individual ones and non-slipping in the collective ones.

Roof with thermal isolation in sandwich kind 60 mm thick (10+40+10), 10 mm wood, 40 mm high density "porexpan" and 10 mm tongue and groove in varnishing wood. The roof can be gable roof or in lacquered plate in only one slope in the 2.50 m part and its interior light sizes are 2.65 m the highest part and 2.45 m the lowest part.

Door and outside windows, it has two doors of 2 x 0.80 m, one as access to the women’s changing room and the other to the men’s.

Electrical supply and plumbing completely recessed to avoid any act of vandalism, according to current regulations. Lightning is made with against-vandalism luminaries with a minimum of 150 lux.

In the individual changing rooms a wooden bank can be installed for the comfort of the users.

The collective changing rooms can be conditioned with all what might be needed, such as showers, toilet bowls and sinks, all of them separated by cubicles with inner accessories made of stainless steel with round edges to avoid any damage to the users.

For proper installation it is only needed a flat, minimally hard surface or only support points with a size of 25 x 25 x 15 cm, leveled between them.

Installation and transport are easy and quick.

5 years guarantee against manufacture defects or rottenness.