Canary public toilet (2 services )

Its sizes, limited by its functionality in transport, are 2.70 x 1.95 x 2.34 m (height).

Inner sizes are thought for one person’s comfort, being uncomfortable for two people, avoiding a bad use.

It allows to be handled easily with a low tonnage crane, what makes it easy to hibernate.

Approximately 1.200 kg.

Structure, can be sight, made of treated wood with risk class number 4, made of planks of 70 mm thick, or it can be covered with wersalite and AISI 316 stainless steel.

Outside walls, can be made of pressure-treated wood with class risk certification 4, with tongue and groove joint of 130 x 22 mm width, with an exterior finish with UV protect varnish, or made of wersalite, it is a material made of resins which is very resistant, this material supports solar rays without losing its color and is totally waterproof, does not become deformed being maintenance free. Due to the fact that it is a material with little porosity, the cleaning in case of graffiti is much simpler than in wood. Available in colors, imitationwood, cream and white.

Inside walls, are made of trespa, this material is completely smooth, without pores, painted in white color with a permanent painting, what is ideal for public toilets, very hygienic, high density, very hard and strong and totally waterproof, what allows the use of abundant water and in pressure in periodical disinfection. The walls are 4 mm. thick and its weight is 8.4 kg/sq.m. It resists the impact value 4 of the EN 438-2 (11) index, water absorption 0%, thermal temperature -40º + 130º C. Reaction to fire according to UNE 23727/90 regulation.

All its metallic components such us hinges, fixations and nuts and bolts are made of AISI 316 stainless steel, completely necessary in marine environments. Hinges are automatic to keep the doors always closed.

Non-slip metallic rustproof floor in aluminium 4 mm thick with special 4% magnesium alloy, which makes it resistant to saltpeter. It is easy to be recycle to become a new high value metal preserving the same properties (it is used for ship's floor).

Roof with thermal isolation in sandwich kind 60 mm thick (10+40+10), 10 mm wood, 40 mm high density "porexpan" and 10 mm tongue and groove in varnishing wood. The roof can be gable roof or in lacquered plate in only one slope in the 2.50 m part and its interior light sizes are 2.65 m the highest part and 2.45 m the lowest part.

All the accessories inside are made of stainless steel with round edges to avoid any damage to the users. Except for the toilet bowl, which may be made of ceramic or stainless steel.

The inner accessories are: interior lock indicating occupied/free, unbreakable mirrors, support for toilet paper, sanitary bin, door knob, washbasin with timing pushbuttons, clothes hangers, support bars and a free space of 1.5 m for the wheelchair, according to regulation.

Special washbasin taps with timing push-buttons in low pressure to make easier its use for children and to elderly people. Its timing is 7 seconds in order to save water.

Optional accessories (not included in the price): grinder, elevator or only conveyor, sewage elevator, hose pipe for inside cleaning connected to the toilet space, electrical hand dryer, soap dispenser, rustproof toilet and automatic programmer allowing us to control the time in use, etc.

Electrical supply and plumbing completely recessed to avoid any act of vandalism, according to current regulations. Lightning is made with against-vandalism luminaries with a minimum of 150 lux.

It has natural and abundant ventilation from the door's down and top.

One slope roof with drain, in a way that, even if the unit has lot of dirty over it, the draining cannot be muffled up, because it has a great opening of 2 m width.

The interior of the toilet is cleaned with a small and easy to handle hose, feed through a quick coupling, without entering the toilet. The hose keeps picked up in the equipments zone. In this way the work of the cleaning service becomes easier, not being lazy when cleaning the toilet, in less than 3 minutes it becomes clean.

The interior is equipped with a gutter which picks up all the spread water and dirt allowing them to go dragged with the pressure of the hose. 

The plumbing installation is made of copper pipes, equipped with a pressure regulator which protects the retainers and rubber seals which exist in the inside of the taps. It is recommended that it all works at a maximum pressure of 2 kg.

It has a motion detector which switches on the light when detects a person and switches off when the person leaves, without any power switch.

For proper installation it is only needed a flat, minimally hard surface or only support points with a size of 25 x 25 x 15 cm, leveled between them.

Water inlet and electrical inlet are provided, as well as draining system.

The water inlet is for 1 inch stainless steel toilets and 2 kg. of pressure in the draining system. For ceramic toilets it is possible the traditional system cisterns not accessible to people, with ¾ inch and water pipes of PVC.

Installation and transport are easy and quick.

If it is located in the beach and there is no drain pipe, we have a fibre tank with grinder, which is directed with a pipe to any waste pipe, despite it is higher (maximum 8 m.) and far (maximum 100 m.)..

5 years guarantee against manufacture defects or rottenness.